Motorola TETRA MTP850 - Setup; Entering the Setup Sub-Menu; Setting the Vibrate Feature

90
•
SCK is Valid — your MTP850 can work encrypted.
•
SCK is Invalid — your MTP850 cannot work encrypted.
Please call your Service Provider to restore SCKs to your
MTP850.
Setup
Entering the Setup Sub-menu
From the main menu, select > Setup.
This sub-menu allows you to change your
MTP850 configuration: vibrate, ring style,
volume, language, data setup, speaker,
tones, and display.
Setting the Vibrate Feature
This sub-menu allows you to determine if your
MTP850 vibrates, or rings, or both vibrates
and rings when receiving a call.
To change the Vibrate setting:
1. From the main menu, select Setup
>
Vibrate.
2. Scroll through the settings.
3. Select required setting, and press
Back to exit.
The Vibrate settings mentioned above apply for all calls. Your
MTP850 can associate different Vibrate settings for different
calls.
To make specific Vibrate settings for different calls:
1. From the main menu, select Setup
> Vi-
brate > Details.
2. Choose which type of call that you want to
modify its Vibrate settings, and press
Select.
Ring calls are Phone calls, PABX and Full-Duplex Private calls.
Calls are Group, Emergency and Private (in half-duplex). Vibrate
Message (Vibrate Msgs) are Status Messages and Text Messages.
Setup
Ring Style
Set Volume
Vibrate
Language
Data Setup
Select Back
Vibrate
Vibe Only
Ring Only
Vibe & Ring
Details...
Select Back
Details...
Group Call
Vibrate Messages
Ring Calls
Select Back
6866537D80-A.book Seite 90 Freitag, 29. Juli 2005 4:15 16