47
Private Call
Press and hold PTT. Wait for the talk permit tone (if
configured) before talking, and release the PTT when
listening. (This is also called a direct setup.)
For a full-duplex call, press and release . You will hear a ring-
ing tone. Wait for the called person to answer your call.
4. To end the call, press .
If the called person or the infrastructure end the call, the
Call
Ended
message is displayed.
Other Ways of Dialing
Dialing via Contact List
You can also use the contact list to select a number you
previously stored. Press Contcs and search the stored
number by scrolling ( or ) or by entering the first
character of the contact name.
If the contact has more than one number stored, pickers
surround the contact icon
. Use / to select the
number.
Short Number Dial
If set up by your Service Provider, Short Dial allows you to
dial part of the full number of the person you wish to call. Your
MTP850 will automatically complete the number and send it
over the air based on your own MTP850's identity. For
example:
1. Dial 456 (instead of 4282456, the full number).
2. To place the call, press the PTT
or .
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but you cannot answer the call.
If no name is stored under a letter, the MTP850 automatically
searches forward, alphabetically, until the next name is found. If
more than one name in the list begins with the same letter, scroll to
view other names.
6866537D80-A.book Seite 47 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
