5
Getting Started
Replacing the Battery
To remove the battery:
1. Push the latch on the bottom.
2. Lift out the bottom of the battery.
3. Replace the battery.
Charging the Battery
Motorola approved chargers provide optimum performance.
Other chargers may not fully charge your Motorola Lithium-
Ion battery or may reduce the life of the battery.
The MTP850 can be either
On or Off during charging.
1. Insert the connector on the charger into the socket at the
base of the MTP850. Select the required plug adapter (UK
or European type) and connect to the charger. Then plug
the charger into a suitable mains socket.
2. The MTP850 displays the
Charger Connected message
only if the MTP850 is
On when connecting the charger. If
the MTP850 is
Off, the display shows an icon of the battery
in charging.
2
1
6866537D80-A.book Seite 5 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
