129
What to do if...
What to do if...
Your MTP850 flashes the following messages:
Messages Message Description
...-Rcvd Call received but not answered, or rejected
Attachment
Failed
The MTP850 could not perform talkgroup attachment. The
MTP850 keeps on trying. If it does not succeed, try another
talkgroup.
Authenticate
Failure
The MTP850 could not register on an Authenticated system
(for example, the Authentication key is incorrect, or
Authentication is disabled in the MTP850).
Battery Flat The battery is uncharged. Recharge the battery.
Call Canceled Called MTP850 cancelled the call.
Call Ended • Faulty channel. Please try later.
• Called MTP850 ended the call.
Call Preempted Channel being used for priority.
Connection to
Server Lost
This is triggered by a WAP server sending session disconnect.
Emgcy In Use:
Wait For Mic
The Hot Microphone feature is active, but the channel transmit
grant has been given to another Emergency Call on the same
talkgroup. The MTP850 microphone is not active during this
time, but the MTP850 will automatically try to regain talk permit
after a predetermined time.
Emgcy Mic Ended The Hot Microphone timer has automatically expired, or the
user has pressed the PTT button to cancel the Hot Microphone
feature.
Emgcy Mic On The Hot Microphone feature is active, and the MTP850 is
automatically transmitting hands free emergency audio.
Empty Entry The speed number you dialled does not exist, or the number
exists but the group is non-selectable.
Faulty Unit
Error...
Self-test failed. An operational fault has been detected with
your MTP850. Record the error number. Turn your MTP850 off
and contact service.
6866537D80-A.book Seite 129 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
