91
The Menu
3. Select the required setting, and press
Select. Press Back to exit
Setting the Ring Style
This sub-menu allows you to set the incoming
call ring style. Your MTP850 features nine
selectable ring styles.
From the main menu, select Setup > Volume.
Upon entry into this sub-menu, the display
shows the current ring style used.
Scroll to the desired style and press
Set. You will hear the new
ring style immediately for a few seconds. If necessary, adjust
the volume level.
Setting the Volume
Once in the menu, select 3 Set Volume.
This sub-menu allows you to adjust the ringer,
earpiece, speaker, and keypad tone volume.
To set the volume:
1. From the main menu, select Setup >
Volume .
2. Scroll through the list.
3. Choose the required item, and press
Change.
4. Adjust the volume level. A feedback tone is heard, and a
volume level bar is displayed.
5.
Press Back to exit.
If you chose Ring Calls or Messages, the settings
available are Vibe & Ring, Vibe Only or Ring Only.
If you chose Group Call, the settings available are
Vibe On or Vibe Off only.
Ring Calls
Vibe Only
Ring Only
Vibe & Ring
Select Back
Group Call
Vibe Off
Vibe On
Select Back
Ring Style
Style 2
Style 3
British
French
Select Back
German
Volume
Earpiece Vol: 1_
Speaker Vol: 1_
Ringer Vol: 0_
Change Done
Keypad Vol: 0_
6866537D80-A.book Seite 91 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
