51
Phone and PABX Call
answer your call.
4. To end the call, press .
Other Ways of Dialing
Dialing via the Contact List
You can also use the contact list to select a number you
previously stored. Press Contcs and search the stored
number by scrolling ( or ) or by entering the first
character of the contact name. If the contact has more than
one number, use / to select the number.
If the contact has more than one number stored, pickers
surround the contact icon
. Use / to select the
number.
Speed Dial
Speed dial allows you to dial a shortened number of up to
three digits instead of the full number. The speed dial number
is the location of an entry in the contact list.
1. Enter the pre-programmed speed dial number (for
example: 5) and press .
2. To place the call, press .
3. To hang up, press .
One-touch Dial
One-touch dialing allows you to place a call by pressing and
holding one of the numeric keys (0-9) or side keys. The
number is the location of an entry (0-9) in the contact list.
1. Press and hold the required numeric key for a few seconds.
Your MTP850 will display the number and dial it.
If no name is stored under a letter, the MTP850 searches forward,
alphabetically, until the next name is found. If more than one name
in the list begins with the same letter, scroll to view other names.
6866537D80-A.book Seite 51 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
