Motorola TETRA MTP850 User Manual

98
2. Press Change.
3. Select required setting (On/Off).
4. Press Done
to exit.
Setting the Contrast
1. From the main menu, select Setup > Display > Contrast.
2. Press Change.
3. Use the left and right navigation keys to change the
contrast. Press Ok.
4. Press Done
to exit.
Entering More...
From the main menu, select More. This sub-
menu Contains more customisable menu
items.
Entering Group Setup
From the main menu, select More > Group
Setup
. This sub-menu allows you to set the
Scan and My Groups features.
Entering Scan
From the main menu, select More > Group Setup > Scan.
This sub-menu allows you to activate/
deactivate scanning, view the active scan list,
and edit the scan lists.
Setting Group Scanning
This sub-menu allows you to activate/deactivate the scanning
of a list of pre-defined groups programmed in the MTP850.
The MTP850 will join any group call as long as this group is
defined in the scan list and scan is turned on.
It is not possible to enable or disable group
scanning in TXI Mode.
Main Menu
Contacts
Security
Messages
Setup
More...
Select Back
Group Setup
My Groups
Scan
Select Back
Scan
Active List
Scanning
Select Back
Scan Lists
6866537D80-A.book Seite 98 Freitag, 29. Juli 2005 4:15 16

Motorola TETRA MTP850 Specifications

General

Dust and Water Protection	IP54
GPS	Yes
Battery	Li-Ion battery
Bluetooth	Yes
Frequency Bands	380-430 MHz, 806-870 MHz
Security	TETRA standard encryption