36
The following screens show examples of how the caller’s
private number (ID 124) is displayed.
For incoming call alert, see settings in the Vibrate menu option
(page 90) and the Tones menu option (page 93).
Any incoming Group call is ALWAYS received through the main
speaker. If configured by your Service Provider, the Group Audio
menu item allows to setup the audio of the incoming Group Call.
If the setup is Speaker Control, you can direct the audio of an active
group to the earpiece (low audio) or the main speaker (high audio).
In low audio speak into the bottom microphone and listen via the
earpiece. In high audio speak into the top microphone and listen via
the speaker.
At the end of a call which has been directed to the earpiece, an
audio hang timer is activated, if it is enabled by your Service
Provider. Within the preprogrammed hang time, any incoming call is
still received through the earpiece. When the timer expires, a low
pitch tone is emitted alerting you that the next incoming Group call
will be received through the speaker. Upon hearing this alert, you
are advised to hold the terminal at a comfortable distance away from
the speaker.
When receiving a Group call, you will hear a “New Group Call” tone
(if configured by your Service Provider).
Private ID
OR
without alias
with alias
Group In Use
ID:124
TG4
Group In Use
Folder 1
TG4
Optns Folder
Optns Folder
Private ID
6866537D80-A.book Seite 36 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
