3
3
Chapter 3 Initial IP Address Configuration
When setting up your NPort 5100 for the first time, you should first configure the IP address. This
chapter introduces the method to configure the device server’s IP address. For more details about
network settings, see the Network Settings section from Chapter 5, Web Console Configuration.
The following topics are covered in this chapter:
Initializing the NPort 5100’s IP Address
Factory Default IP Address
NPort 5100 Administration Suite Å recommended configuration method
ARP
Telnet Console
Serial Console (19200, n, 8, 1)
To Next Page
Loading...
Need help?
General
