NPort 5100 Series User’s Manual Configuring NPort Administrator
6-19
2. Off-line COM Mapping:
Map COMs to your host Æ Apply Change Æ Connect the NPort 5100 to the network Æ
Configure NPort 5100’s IP address.
On-line COM Mapping
1. Broadcast Search for NPort 5100s on the network.
2. Select the COM Mapping function group.
3. Add the target to which you would like to map COM ports.
4. The NPort 5100 list that appears is the list generated by the previous Broadcast Search. Select
the NPort 5100 to which you would like to map COM ports.
To Next Page
Loading...
