NPort 5100 Series User’s Manual Configuring NPort Administrator
6-8
Unlock
The NPort 5100 is password protected, “Broadcast Search” was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during
this Administrator session, activating various utilities for this NPort 5100 will not require
re-entering the server password.
Blank
The NPort 5100 is not password protected, and “Broadcast Search” was used to locate it.
Fixed
The NPort 5100 is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NPort 5100 is password protected, “Specify by IP address” was used to locate it, and the
password has not yet been entered from within the current Administrator session.
Unlock Fixed
The NPort 5100 is password protected, “Specify by IP address” was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during
this Administrator session, activating various utilities for this NPort 5100 will not require
re-entering the server password.
Configuring the NPort 5100
In this section, we illustrate how to access the NPort 5100’s configuration utility. You should first
make sure that you can connect over the network from your computer to the NPort 5100.
1. To start NPort Administrator, click Start Æ NPort Administration Suite Æ NPort
Administrator.
2. Unlock the NPort 5100 you wish to configure if it is password protected. Right click the
NPort 5100 and select Configure to start the configuration.
To Next Page
Loading...
