Moxa Technologies NPort 5100 Series User Manual

NPort 5100 Series User’s Manual Web Console Configuration
5-32
Monitor Async
Click Async under Monitor to show the current status of the serial port.
Monitor Async-Settings
Click Async Setting under Monitor to show the run-time settings for the serial port.
Change Password
Input the “Old password” and “New password” to change the password. Leave the password boxes
blank to erase the password. If the password is erased, then NPort 5100 will not have password
protection.
ATTENTION
If you forget the password, the ONLY way to configure NPort 5100 is by using the Reset button
on NPort 5100’s casing to “Load Factory Default.”
Remember to export the configuration file using NPort Administrator when you finish the
configuration. By using the Import function of NPort Administrator, your configuration can be
re-loaded into NPort 5100 after using “Load Factory Default.” Refer to Chapter 6 for more
details about the Export and Import function.

Moxa Technologies NPort 5100 Series Specifications

General

Brand	Moxa Technologies
Model	NPort 5100 Series
Category	Server
Language	English