Moxa Technologies NPort 5100A Series User Manual

NPort 5000 Series User Manual
126
4. Finally, click Yes to confirm.
Adding a Port to a COM Group
Follow the steps below to add a serial port into an existing COM Group:
1. Select the serial port that you are adding and right-click to select COM Settings.
2. Select the COM number of the COM Group you are adding and check mark the Grouping selected
port(s) together check box and then click OK.

Moxa Technologies NPort 5100A Series Specifications

General

Brand	Moxa Technologies
Model	NPort 5100A Series
Category	Media Converter
Language	English