Moxa Technologies NPort 5100A Series - 5 Web Console Configuration

5
5. Web Console Configuration
The Web Console is the most user-friendly method available to configure the NPort 5100A. In this chapter, we
introduce the Web Console function groups and function definitions.
The following topics are covered in this chapter:

Opening Your Browser

Quick Setup

Export/Import

Basic Settings

Network Settings
 SNMP Settings
 IP Address Report

Serial Settings

Serial Parameters

Operating Settings
 Real COM Mode
 RFC 2217 Mode
 TCP Server Mode
 TCP Client Mode
 UDP Mode
 UDP Multicast
 Pair Connection Mode
 Ethernet Modem Mode
 Dial-in
 Dial-out
 Disconnection Request from the Local Site
 Disconnection Request from the Remote Site
 AT Commands
 S Registers
 Reverse Telnet Mode
 Disabled Mode

Accessible IP Settings

Auto Warning Settings
 Auto warning: Email and SNMP trap
 Event Type

Upgrade Firmware

Monitor
 Monitor Line
 Monitor Async
 Monitor Async-Settings

Change Password

Load Factory Default