Moxa Technologies NPort 5100A Series - Configuring the Nport 5100 A

NPort 5100A Series Configuring NPort Administrator
6-8
Configuring the NPort 5100A
In this section, we illustrate how to access the NPort 5100A’s configuration utility. You should first make sure
that you can connect over the network from your computer to the NPort 5100A.
1. To start NPort Administrator, click Start  Programs  NPort Administration Suite  NPort
Administrator.
2. Unlock the NPort 5100A you wish to configure if it is password protected. Right click the NPort 5100A and
select Configure to start the configuration process.
3. The progress bar shows that Administrator is retrieving configuration information from the specific NPort
5100A.
4. Refer to Chapter 5 for each parameter’s function definition. To modify the configuration, you must first click
in the modify box to activate the parameter setting box.