NPort 5100A Series Web Console Configuration
Quick Setup
Quick Setup streamlines configuration of your NPort into three basic and quick steps that cover the most
commonly-used settings. At any time while in Quick Setup you may click the Back button to return to the
previous step, or the Cancel button to reverse all settings. For more detailed settings, please refer to the
“Basic Settings,” “Network Settings,” “Serial Settings,” and “Operating Settings,” sections later in this chapter.
Step 1/3: In this step, you must assign a valid IP address to the NPort 5100A before it will work in your
network environment. Your network system administrator should provide you with an IP address and related
settings for your network. In addition, the server name field is a useful way to specify the location or application
of different NPort 5100As.
Step 2/3: In this step, you must specify which operation mode you will use. If your operation mode is not Real
COM, TCP Server, TCP Client, or UDP mode, click Cancel to return to the main menu and choose
Operating Settings to select your proper setting.
To Next Page
Loading...
