Moxa Technologies NPort 5100A Series - Modify Ports in a COM Group; Changing the COM Number of a COM Group

NPort 5100A Series Configuring NPort Administrator
6-25
3. You will be able to view the serial ports that were assigned to and removed from the Group. Click Apply to
apply the settings.
4. Finally, click Yes to confirm.
Modify Ports in a COM Group
In the following subsections we examine three ways in which the serial ports in a COM Group can be modified:
Changing the COM Number of a COM Group
1. Select all serial ports in the Group and right-click to select COM Settings.