Moxa Technologies NPort 5100A Series - Serial Settings

NPort 5100A Series Web Console Configuration
5-10
Auto report to IP
Setting Factory Default Necessity
E.g., 192.168.1.1 or URL (IP addresses of the
form x.x.x.0 and x.x.x.255 are invalid.)
None Optional
Reports generated by the Auto report function will be automatically sent to this IP address.
Auto report to UDP port
Setting Factory Default Necessity
E.g., 4001 4002 Optional
Auto report period
Setting Factory Default Necessity
Time interval (in seconds) 10 Optional
Serial Settings
Click Serial Settings, located under Main Menu, to display serial port settings for port 1.
To modify serial settings click Port 1 under Serial Settings, located under Main Menu on the left side of the
browser window.