Moxa Technologies NPort 5100A Series - 3 Initial IP Address Configuration

3
3. Initial IP Address Configuration
When setting up your NPort 5100A for the first time, you should first configure the IP address. This chapter
introduces the method to configure the device server’s IP address. For more details about network settings,
see the Network Settings section from Chapter 5, Web Console Configuration.
The following topics are covered in this chapter:

Initializing the NPort 5100A’s IP Address

Factory Default IP Address

NPort Administration Suite

ARP

Telnet Console

Serial Console (19200, n, 8, 1) (NPort 5110A/5150A/P5150A only)