Moxa Technologies NPort 5100A Series - Monitor; Initiating the Monitor Function; Using the Monitor Function

NPort 5100A Series Configuring NPort Administrator
6-11
Monitor
Initiating the Monitor Function
To initiate the Monitor function, click Broadcast Search  Monitor  Add Target.
1. With Configuration selected under Function, use Broadcast Search to locate all NPorts on your LAN.
2. Next, click Monitor  Add Target and select your targets from the list, and then click OK.
Using the Monitor Function
1. The NPort 5100A list will appear on the Monitor screen.
2. Right click the panel and select Settings.