Moxa Technologies NPort 5100A Series - Page 30

NPort 5100A Series Web Console Configuration
5-3
4. The NPort 5100A homepage will open next. There are two buttons on this page: Quick setup and
Export/Import. You can click Overview at any time to go back to this page. The following sections introduce
these two convenient functions and all the other specific settings in the left Main Menu.
ATTENTION
If you can’t remember the password, the ONLY way to start configuring
the NPort 5100A is to load factory
defaults
by using the Reset button located near the NPort 5100A’s RJ45 Ethernet port.
Remember to
export the configuration file when you have finished the configuration. After using the Reset
button to load factory defaults, your configuration can be easily reloaded into
the NPort 5100A using the
Import function.
ATTENTION
If your NPort 5100A application requires using password protection, you must enable the cookie function in
your browser. If the cookie function is disabled, you will not be allowed to enter the Web Console Screen.