Moxa Technologies TAP-125 Series - Network Settings

TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
3-5
Device name
Setting
Description
Factory Default
Max. 31 of characters
This option is useful for specifying the role or application of
TAP-125-UN-CT-T
different TAP-125-U-W-X-Z (YYYYYYYY) units.
(TI)_<Serial No. of
this
TAP-125-UN-CT-T
(TI)>
Device location
Setting
Description
Factory Default
Max. of 31 characters
Specifies the location of different TAP-125-U-W-X-Z
(YYYYYYYY) units.
None
Device description
Setting
Description
Factory Default
Max. of 31 characters
Use this space to record a more detailed description of the
TAP-125-U-W-X-Z (YYYYYYYY)
None
Device contact information
Setting
Description
Factory Default
Max. of 31 characters
Provides information about whom to contact in order to resolve
problems. Use this space to record contact information of the
person responsible for maintaining this TAP-125-U-W-X-Z
(YYYYYYYY).
None
Network Settings
The Network Settings configuration panel allows you to modify the usual TCP/IP network parameters. An
explanation of each configuration item is given below.
IP configuration
Setting
Description
Factory Default
DHCP
The TAP-125-U-W-X-Z (YYYYYYYY)’s IP address will be
assigned
automatically by the network’s DHCP server
Static
Static
Set up the TAP-125-U-W-X-Z (YYYYYYYY)’s IP address
manually.
IP address
Setting
Description
Factory Default
TAP-125-UN-CT-T
(TI)’s IP address
Identifies the TAP-125-U-W-X-Z (YYYYYYYY) on a TCP/IP
network.
192.168.127.253