2. Warning messages will pop out to warn users that the security certificate was issued by a company they
have not chosen to trust.
3. Select Yes to accept the certificate issued by Moxa IW and then enter the TAP-125-U-W-X-Z
(YYYYYYYY)’s web browser interface secured via HTTPS/SSL. (You can see the protocol in URL is https.)
Then you can use the menu tree on the left side of the window to open the function pages to access each
of TAP-125-U-W-X-Z (YYYYYYYY)’s functions.
Disabling Telnet and Browser Access
If you are connecting the TAP-125-U-W-X-Z (YYYYYYYY) to a public network but do not intend to use its
management functions over the network, then we suggest disabling both Telnet Console and Web
Configuration. Please run Maintenance Console Settings to disable them, as shown in the following
figure.
To Next Page
Loading...
