TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
Trap
E-mail Server Settings
You can set up to 4 e-mail addresses to receive alarm emails from the TAP-125-U-W-X-Z (YYYYYYYY). The
following parameters can be configured on the E-mail Server Settings page. In addition, a Send Test Mail
button can be used to test whether the Mail server and e-mail addresses work well. More detailed explanations
about these parameters are given after the following figure.
Mail server (SMTP)
The IP Address of your email server.
User name and password used in the SMTP server
Enter the administrator’s e-mail address which will be shown in
the “From” field of a warning e-mail.
To E-mail address 1/ 2/ 3/ 4
Enter the receivers’ e-mail addresses.
Traps can be used to signal abnormal conditions (notifications) to a management station. This trap-driven
notification can make your network more efficient.
Because a management station usually takes care of a large number of devices that have a large number of
objects, it will be overloading for the management station to poll or send requests to query every object on
every device. It would be better if the managed device agent could notify the management station by sending
a message known as a trap for the event.
To Next Page
Loading...
Need help?
General
