Moxa Technologies TAP-125 Series User Manual

TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
3-24
Syslog Server Settings
You can configure the parameters for your Syslog servers in this page.
Syslog server 1/ 2/ 3
Setting
Description
Factory Default
IP address
Enter the IP address of the 1st/ 2nd/ 3rd Syslog Server
None
Syslog port
Setting
Description
Factory Default
Port destination
(1 to 65535)
Enter the UDP port of the corresponding Syslog server
514
E-mail
E-mail Event Types
Check the box for Enable Notification to enable the event items. All default values are deactivated
(unchecked). Details for each event item can be found on the “System log Event Types” table on page 3-31.

Moxa Technologies TAP-125 Series Specifications

General

Brand	Moxa Technologies
Model	TAP-125 Series
Category	Network Hardware
Language	English