TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
ATTENTION
Changing the time zone will automatically adjust the Current local time. You should configure the Time
zone before setting the Current local time.
User selectable time
zone
The time zone setting allows conversion from GMT (Greenwich
Mean Time) to local time.
GMT (Greenwich
Mean Time)
Daylight saving time (also known as DST or summer time)
involves advancing clocks (usually 1 hour) during the summer
time to provide an extra hour of daylight in the afternoon.
When Daylight saving time is enabled, the following parameters will be shown:
• Starts at: The date that daylight saving time begins.
• Stops at: The date that daylight saving time ends.
• Time offset: Indicates how many hours forward the clock should be advanced.
Time server 1/2
IP or Domain name of the NTP time server. The 2nd NTP server
will be used if the 1st NTP server fails to connect.
Query period time
(1 to 9999 seconds)
This parameter determines how often the time is updated from
the NTP server.
Wireless Settings
The essential settings for wireless networks are presented in this function group. Settings must be properly set
before establishing your wireless network. Familiarize yourself with the following terms before starting the
configuration process:
AP: In a wireless local area network (WLAN), an access point is a station that transmits and receives data.
Client: When the TAP-125-U-W-X-Z (YYYYYYYY) is configured for Client mode, it can be used as an
Ethernet-to-wireless (or LAN-to-WLAN) network adaptor. For example, a notebook computer equipped with an
Ethernet adaptor but no wireless card can be connected to this device with an Ethernet cable to provide
wireless connectivity to another AP.
To Next Page
Loading...
Need help?
General
