Moxa Technologies TAP-125 Series User Manual

TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
3-26
Trap Event Types
SNMP Trap Receiver Settings
SNMP traps are defined in SMIv1 MIBs (SNMPv1) and SMIv2 MIBs (SNMPv2c). The two styles are basically
equivalent, and it is possible to convert between the two. You can set the parameters for SNMP trap receivers
through the web page.
1st / 2nd Trap version
Setting
Description
Factory Default
V1
SNMP trap defined in SNMPv1
V1
V2
SNMP trap defined in SNMPv2
1st / 2nd Trap server IP/name
Setting
Description
Factory Default
IP address or host
name
Enter the IP address or name of the trap server used by your
network.
None
1st / 2nd Trap community
Setting
Description
Factory Default
Max. of 31 characters
Use a community string match with a maximum of 31
characters for authentication.
alert

Moxa Technologies TAP-125 Series Specifications

General

Brand	Moxa Technologies
Model	TAP-125 Series
Category	Network Hardware
Language	English