2 Safety
12 BA6820378-03 EN
This technical document contains detailed descriptions on the safe and
proper installation, connection, commissioning and monitoring of the prod-
uct.
▪ Read this technical document through carefully to familiarize yourself with
the product.
▪ This technical document is a part of the product.
▪ Read and observe the safety instructions provided in this chapter in partic-
ular.
▪ Observe the warnings in this technical document in order to avoid func-
tion-related dangers.
▪ The product is manufactured on the basis of state-of-the-art technology.
Nevertheless, risks to life and limb of the user or impairment of the prod-
uct and other material assets may occur during use due to function-re-
lated dangers.
2.1 General safety information
All persons responsible for the assembly and commissioning of the device
must have sufficient specialist training.
Improper operation or misuse may lead to:
▪ Serious injury or death
▪ Damage to the device and other property of the user
▪ A reduction in the efficient functioning of the equipment
2.2 Appropriate use
The maintenance-free MESSKO® MTRAB® dehydrating breather is used in
oil-insulated transformers, reactors and tap changers for dehydrating the air
sucked into oil conservators.
If used as intended, in compliance with the requirements and conditions
specified in this technical document and observing the warning notices in
this technical document and attached to the product, the product does not
pose risk of injury or damage to property or the environment. This applies
across the entire service life of the product, from delivery to installation and
operation through to disassembly and disposal.
To Next Page
Loading...
