MR MESSKO MTRAB - Removing the Lifting Gear Again; Removing the Red Protective Cap

5 Mounting
49BA6820378-03 EN
5.4.6 Removing the lifting gear again
► Remove the lifting gear again carefully. For DB100 / DB200, replace the
lifting eye bolt with the grounding screw including washer.
Figure30: Grounding screw
5.5 Removing the red protective cap
NOTICE
Dehydrating breather malfunction!
The red protective cap blocks air exchange during operation of the dehy-
drating breather!
► Make sure that the red protective cap is removed from the dust protec-
tion tube before commissioning.
Figure31: Warning sticker on the dust protection tube