Table of contents
4 BA6820378-03 EN
3.11 Safety markings and nameplate .................................................... 25
4 Packaging, transport and storage ....................................27
4.1 Purpose ......................................................................................... 27
4.2 Suitability, structure and production............................................... 27
4.3 Markings ........................................................................................ 27
4.4 Transportation, receipt and handling of shipments........................ 27
4.5 Storage of shipments..................................................................... 29
4.6 Further transport ............................................................................ 29
4.7 Unpacking...................................................................................... 29
5 Mounting .............................................................................33
5.1 Installation recommendations ........................................................ 33
5.2 Checking the connecting flange on the transformer ...................... 35
5.3 Preparing the device...................................................................... 36
5.4 Mounting the device on the counterflange..................................... 39
5.4.1 Attaching the lifting gear............................................................................. 40
5.4.2 Inserting the flange gasket ......................................................................... 42
5.4.3 Screwing on the flanges............................................................................. 43
5.4.4 Aligning the device ..................................................................................... 47
5.4.5 Tightening the double screw connection.................................................... 47
5.4.6 Removing the lifting gear again.................................................................. 49
5.5 Removing the red protective cap ................................................... 49
6 Electrical connection .........................................................51
6.1 Electromagnetic compatibility ........................................................ 51
6.1.1 Wiring requirement of installation site ....................................................... 51
6.1.2 Wiring requirement of operating site ......................................................... 52
6.2 Supply voltage ............................................................................... 52
6.3 Cable recommendation.................................................................. 53
6.4 Routing and preparing the cable.................................................... 54
To Next Page
Loading...
