Introduction 1-2DXL5000 User and Technical Manual
If you’re viewing this manual electronically, it’s easy - just click on
the link below to send us an E-mail.
Or, you can E-mail our Technical Support team at:
technicalsupport@mrcbroadcast.com
Be sure to tell us what product you’re writing about, and which
manual.
1.6 System Description
The DXL5000 Digital Microwave System is a cost effective,
highly reliable, flexible, and compact microwave link for long and
medium haul applications, including Studio-to-Transmitter Links
(STL) and Transmitter-to-Studio Links (TSL), multi-hop and
multi-channel broadcast, Community Antenna Television
(CATV), Standard Definition Television (SDTV), High Definition
Television (HDTV), and Analog Television (ATV) video system
networks.
The DXL5000 System is designed to provide high quality digital
format transmission under a Single Carrier Modulation (SCM)
scheme. The DXL5000 System can be configured as either a
simplex or a duplex system. Protection options, such as hot
standby, including space and frequency diversity, will be
available in the future. A high power option is also available for
severe fading transmission environments.
The DXL5000 System consists of a digital microwave
Transmitter and a digital microwave Receiver. See Figure 1-1.
Feedback
Figure 1-1: DXL5000 System - Typical
The DXL5000 System is designed to be controlled locally or
remotely using a Windows-based PC or laptop computer.
1.6.1 Configuration Options
The DXL5000 System is currently available in the following
configurations:
•Simplex
•Duplex
• Non-protected
• TX, RX, Duplex
• Space Diversity RX
Consult your Sales Representative or contact the factory for the
latest information.
1.6.2 Configuration Descriptions
General The front panels of the DXL5000 Transmitter and
Receiver each contain three status LEDs and a 4-digit display.
DXL5000 Transmitter The rear panel of the DXL5000
Transmitter contains the I/O connectors, the AC input power
DXL5000 Transmitter
DXL5000 Receiver
To Next Page
Loading...