MRC DXL5000 RX - Advanced Operation Procedures; User Name and Password Setup

Operation 2-24DXL5000 User and Technical Manual Operation 2-24DXL5000 User and Technical Manual
2.7 Advanced Operation Procedures
The procedures required to assign user names and passwords
and to download new software into either the DXL5000
Transmitter or Receiver are contained in the following
paragraphs. These procedures are generic to both the
Transmitter and Receiver.
2.7.1 User Name and Password Setup
To set up the DXL5000 Transmitter and/or Receiver users and
passwords, see Figure 2-17. This procedure may only be
performed by the system administrator.
To set up user names and passwords, select the Administration
tab, select the User Accounts tab, and then select the
applicable user to be added, changed, or deleted.
Figure 2-17: User Name and Password Setup
Administration Tab
Help Tab
User 1 User 2 User 3 User 4
User Accounts
Tab
Administrator
Password:
Enter
Administrator
password
Enter User 1
password
Enter User 2
password
Enter User 3
password
Enter User 4
password
User Name:
Enter
Administrator
user name
Enter User 1 user
name
Enter User 2 user
name
Enter User 3 user
name
Enter User 4 user
name
User Name: User Name: User Name: User Name:Password: Password: Password: Password:
Select Submit
option button
Select Submit
option button
Select Submit
option button
Select Submit
option button
Select Submit
option button
Notes:
The Administration tab is displayed only if the Administrator has logged into the
radio. Only the Administrator may add, change, or delete users.
When the Submit option button is selected, the User Name and Password will
be entered into the radio software.
If changes have been made to either a User Name or Password, selecting the
Reset option button will cancel the changes to the User Name and Password.
To delete a user, select the Delete option button.