MRC DXL5000 RX - Review DXL5000 System Receiver Status

Operation 2-19DXL5000 User and Technical Manual Operation 2-19DXL5000 User and Technical Manual
2.6.1 Review DXL5000 System Receiver Status
To review the current DXL5000 System Receiver status, first
select the Status tab and then select the Identification tab,
Monitor Radio Tab, Firmware Revisions tab, or Monitor
Demod tab, as required. See Figure 2-12.
Figure 2-12: Status Tab Options - Typical
Select Status Tab
Select Identification
Tab
Select Monitor
Radio Tab
Select Help Tab
Select Monitor
Demod Tab
IP Address: XXX.XXX.X.XX
Subnet Mask: YYY.YYY.YYY.Y
Default Gateway: ZZZ.ZZZ.Z.Z
Serial Number: 1234567890
Software Version: X.Y.Z
Site Name: XXXXX
Call Sign: YYYY
Date Installed: MM/DD/YY
User Information 1: XXX
User Information 2: YYY
User Information 3: ZZZ
Operating Frequency: XXXX.XX MHz
RSL Input Power: 32.0 dBm
+12V: 12.1
+15V: 14.9
-15V: -15.1
+5V: 4.9
System Temp: 0.0
Symbol Rate: 20.0 Msps
Modulation: QPSK
Percent Utilization: 50.00%
Core Channel 1: none at 0.000 Mbps
Core Channel 2: none at 0.000 Mbps
Core Channel 3: none at 0.000 Mbps
Core Channel 4: none at 0.000 Mbps
Invert Spectrum: OFF
PRBS: OFF
SNR: 0.00 dB
EVM: 0.0%
Select Firmware
Revisions Tab
System Software: 0.XX
SCM PC FPGA: N/A
SCM PC uP: N/A
SCD PC FPGA: 3.0.0
SCD PC uP: 3.0.1
Radio Type: DXL5000 Rx