MRC DXL5000 RX - MGMT Connections; SUMMARY ALARM Connections; CHAN1 and CHAN2 T1;E1 Connections

Installation 4-10DXL5000 User and Technical Manual
4.8.3 MGMT Connections
The rear panel MGMT RJ-45 connector provides 10 Base T
Ethernet connection via your web browser to a PC at a local or
remote location for control of the unit. For pin-outs of the
connector, see Table 4-3.
Table 4-3: MGMT Connector Pin-Outs
4.8.4 SUMMARY ALARM Connections
The 15-pin SUMMARY ALARM female D connector provides
summary alarm data for common faults and events. For pin-outs of the
connector, see
Table 4-4.
Connector Information Pin
Signal
Description
RJ-45 Connector. 1 ETH4_DA_P
2 ETH4_DA_N
3 ETH4_DB_P
4 N/C
5 N/C
6 ETH4_DB_N
7 N/C
8 N/C
1 2 3 4 5 6 7 8
Table 4-4: SUMMARY ALARM Connector Pin-Outs
4.8.5 CHAN1 and CHAN2 T1/E1 Connections
The CHAN1 T1/E1 and CHAN2 T1/E1 RJ-45 connectors provide
Channel 1 and Channel 2 T1/E inputs to the unit. For pinouts of
the connectors, see Table 4-5 on page 4-11.
Connector Information Pin
Signal
Description
15-Pin, Female, “D” Connector. 1 MAJOR1_NO
2 MAJOR1_COM
3 MAJOR2_NC
4 MINOR_NO
5 MINOR_COM
6 EXTERNAL_NO
7 N/C
8 N/C
9 MAJOR1_NC
10 MAJOR2_NO
11 MAJOR2_COM
12 MINOR_NC
13 GND
14 N/C
15 N/C
1
8
9
15