Operation 2-25DXL5000 User and Technical Manual Operation 2-25DXL5000 User and Technical Manual
2.7.2 Download New System Software
To load new software into the DXL5000 System Transmitter, the
Downloads tab must be selected. See Figure 2-18. This
procedure may only be performed by the System
Administrator.
Figure 2-18: Downloads Tab Options
Open Windows
Internet Explorer
Log In screen is
displayed
Enter password
in Password:
text box
Select Log In
option button
Select
Downloads Tab
Enter IP address
Notes:
Software upgrade files must be obtained from the
factory prior to performing this procedure. The
software upgrade file(s) should be stored on your PC
hard drive.
Only the System Administrator may perform this
procedure.
Verify DXL5000 System
Transmitter/Receiver is
powered up
Select
Software Tab
Enter user name
in User Name
text box
Select Browse
option button and
select the
required
Firmware File
CAUTION
In the event of a power failure during the software upgrade
process, the DXL5000 software can be erased.
It is recommended that the software upgrade be performed
using an uninterruptible power supply.
Only use a valid upgrade file provided by the factory.
Failure to use factory-provided upgrade software can result
in damage to the equipment
When Firmware
File is selected,
select Upgrade
option button
When upgrade is
complete, select
Log Out tab
Download
procedure is
complete. Return
to normal
operation
To Next Page
Loading...