MRC DXL5000 RX - Replacement Parts and Supported Repairs

5
Replacement Parts and
Supported Repairs
5-1DXL5000 User and Technical Manual
Replacement Parts and
Supported Repairs
5.1 Chapter Overview
This chapter identifies replacement parts and supported repairs
applicable to the DXL5000 Digital Microwave System (DXL5000)
Transmitter and Receiver.
5.2 Replacement Parts
The only parts available are external cables and power fuses.
5.2.1 External Cables
The AC power cables for the DXL5000 transmitter and receiver
are listed in Table 5-1. If you need something that is not listed,
contact your Sales Representative or consult the factory.
5.2.2 AC Power Fuses
The DXL5000 Transmitter and Receiver operate on the following
AC power:
• 120/240 VAC, 50/60 Hz
Fuse ratings for the AC power sources are listed in Table 5-2.
Table 5-1: DXL5000 Power Cables
Description Comments
AC Power Cable (120/240
VAC)
Connects AC power to the DXL5000
IDU.
Table 5-3: Receiver AC Power Fuses
5.3 Supported Repairs
There are no supported field repairs to the DXL5000 System
Transmitter or Receiver. Return the unit(s) for factory repair.
If you attempt field repair, you risk damaging your
equipment. If your equipment is under warranty, you may also
affect your warranty coverage.
The DXL5000 System Transmitter and Receiver require
specialized test equipment and software to calibrate operating
characteristics after repair.
Table 5-2: Transmitter AC Power Fuses
Operating Voltage Fuse Rating
120 VAC, 50/60 Hz 3.0A, 250V AGC, Slow Blow
240 VAC, 50/60 Hz 3.0A, 250V AGC, Slow Blow
Operating Voltage Fuse Rating
120 VAC, 50/60 Hz 1.0A, 250V AGC, Slow Blow
240 VAC, 50/60 Hz 1.0A, 250V AGC, Slow Blow