Installation 4-9DXL5000 User and Technical Manual
CHAN1 T1/E1 RJ-45 connector Provides Channel 1 T1/E1 outputs from
the unit.
See ”CHAN1 and CHAN2 T1/E1
Connections” on page 4-10 for pin-
outs.
CHAN2 T1/E1 RJ-45 connector Provides Channel 2 T1/E1 outputs from
the unit.
See ”CHAN1 and CHAN2 T1/E1
Connections” on page 4-10 for pin-
outs.
ASI/DS3/E3 1 75 ohm BNC female connector Provides ASI or DS3/E2 outputs from the
unit.
ASI/DS3/E3 2 75 ohm BNC female connector Provides ASI or DS3/E2 outputs from the
unit.
RF IN SMA 50 ohm female connector Provides 70 MHz input to the unit.
ASI/SMPTE310 75 ohm BNC female connector Provides ASI or SMPTE310 outputs from
the unit.
DIV OUT 75 ohm BNC female connector Provides the diversity receive output from
the unit.
IMC BUS 9-pin male D-connector (Reserved for future use.)
WAYSIDE DATA 9-pin male D-connector
Provides RS-232 connections for SCM
operations.
See ”WAYSIDE DATA
Connections” on page 4-11 for pin-
outs.
DIV IN 75 ohm BNC female connector Provides the diversity receive input to the
unit.
POWER IN AC power connector Provides AC power to the unit.
Connector Type Function Comments
To Next Page
Loading...