Operation 2-10DXL5000 User and Technical Manual
Figure 2-3: Initial Setup
Open Windows
Internet Explorer
Log In screen is
displayed
Enter admin
in User Name:
text box
Enter admin
in Password:
text box
Select Log In
option button
Select Setup Tab
Enter factory
default IP
address
(192.168.0.10)
Select
Identification
Tab
Default Gateway:
Enter new Default
Gateway
address, as
required
Select Submit
option button and
power-cycle radio
IP Address:
Enter new IP
Address, as
required
Subnet Mask:
Enter new Subnet
Mask address, as
required
Note:
After setting addresses, the
Submit option button must be
selected and the radio power
must be cycled from on to off.
The radio does not need to be
power-cycled when other
options are changed.
Verify DXL5000 System
Transmitter/Receiver is
powered up
Note:
The factory default User
Name and Password is
admin.
Perform “Review
Transmitter Alarms” on
page 2-16
To Next Page
Loading...