Operation 2-14DXL5000 User and Technical Manual
Figure 2-7: Setup Tab Options - Sheet 2
Select Modulator
Tab
Modulation:
Select
Modulation
menu option
required. Options
are QPSK,
16QAM, 32QAM,
64QAM, QPSK
1/2, QPSK 2/3,
QPSK 3/4, QPSK
5/6, QPSK 7/8,
16QAM 1/2,
16QAM 3/4,
64QAM 2/3,
64QAM 3/4,
64QAM 5/6, or
64QAM 7/8
Symbol Rate:
Enter Symbol
Rate (range is
3.0 to 20.0) or
accept default
rate, as required
Core Channel X:
A
Select Submit
option button
Setup is complete
B
Invert Spectrum PRBS
Select On or Off
option button , as
required
Select On or Off
option button , as
required
Note
The Invert Spectrum - On radio button
should be selected only in the event the
incoming signal becomes inverted due to
a device or event in the signal path.
CAUTION
The PRBS – On radio button should be
selected only for system setup or
troubleshooting. For normal operation,
the PRBS – Off radio button must be
selected.
Selection of the PRBS – On radio option
button will result in loss of the broadcast
signal.
From
Figure 2-
6 on
page 2-13
To Figure 2-8
on page 2-15
To Next Page
Loading...