44 FL5000 Multi-Spectrum Flame Detector US
8 Learn More
8.3 Accessories
Additional information is available upon request for any of the accessories below.
8.3.1 Test Lamp with Charger - PN TL105-1001
Due to the advanced discrimination of the FL5000, the TL105 Test Lamp was developed. The Test Lamp is a battery
operated, rechargeable, test source specifically designed to test General Monitors’ IR Flame Detection Systems. It
consists of a high-energy broadband radiation source that emits sufficient energy in the infrared spectra to activate the IR
detector. To simulate a fire, the TL105 Test Lamp automatically flashes a signal that the FL5000 recognizes.
For full instructions see 4.3.1 Test Lamp.
Figure 22 Test Lamp Accessory
8.3.2 Mounting Bracket - PN 71370-1
A mounting bracket is available to mount the FL5000 to a wall, pole, etc. The mounting bracket design allows for optical
alignment adjustments when utilizing to a fixed installation. Please refer to Figure 11 Detector Mounting and Installation.
Figure 23 Mounting Bracket Accessory
To Next Page
Loading...
