MSB Technology Network Renderer - Step 5: Verify Your Firmware

18
Step 5: Verify Your Firmware
 The MSB Renderer module does require the latest DAC firmware. For the Analog DAC
for example, the firmware M16 and D16 are required to make the Renderer show up as
the STR (Stands for Streamer, which is another term for Renderer) input and be
functional.
 Please check the following MSB Tech Support website for the required firmware for your
DAC and follow the instructions:
 http://www.msbtech.com/updates/updateHome.php
Congratulations!
Your MSB Network Renderer module is now ready for use.