Muller TOUCH800 - Page 4

Table of contents
4
V9.20191001
30322538-02-EN
5.8
Hiding an application
25
5.9
Using the keyboard
25
5.10
Using a memory device
26
5.10.1
Using SD card
26
5.10.2
Folders on the USB memory device
26
5.10.3
Displaying the content of the memory device on the terminal
27
6
Connecting and configuring external devices
28
6.1
GPS receiver
28
6.1.1
Connecting the GPS receiver to the terminal
28
6.1.2
Changing the driver for the GPS receiver
28
6.1.3
Configuring the GPS receiver
30
Parameters for the GPS receiver
30
RTK or L band licence for SMART-6L
33
GSM modem for SMART-6L
33
Configuring the GPS receiver for the steering system
34
6.1.4
Recording GPS position
35
6.1.5
Configuring the “GPS TILT-Module” tilt module
36
6.2
Configuring the joystick button allocations
36
6.3
Connecting sensors to the terminal
37
6.4
Camera
38
6.4.1
Connecting the camera to the terminal
38
Connecting the camera HQ2
38
Connecting the camera NQ
39
6.4.2
Activating a camera
39
6.4.3
Operating the camera
40
6.5
External lightbar
40
6.5.1
Connecting the external lightbar to the terminal
40
6.5.2
Activating an external lightbar
41
6.6
Connecting the on-board integrated display/controller to the terminal
41
6.7
ISO Printer
42
6.7.1
Connecting the ISO printer to the terminal
42
6.7.2
Activating ISO Printer
43
6.8
Configuring the Bluetooth connection in the Connection Center
43
6.9
Crop protection sensors
43
7
Configuring the terminal in the Service application
45
7.1
Changing the language
45
7.2
Basic terminal settings
45
7.3
Activating and deactivating applications
47
7.4
Unlocking licenses for full versions
48
7.5
Creating screenshots
49
7.6
Deleting pools
49
7.7
Using the Open Data Interface
49
7.7.1
Activating ME ODI
50
7.7.2
Opening ME ODI
50