Muller TOUCH800 - Activating and Deactivating Applications

Configuring the terminal in the Service application
Activating and deactivating applications
7
30322538-02-EN
V9.20191001
47
Parameter name
Function
Number of navigation buttons The terminal provides a maximum of 12 function icons in each
application.
When you connect an ISOBUS job computer that has more
functions in a single screen to the terminal, their function icons
are spread over multiple pages. Furthermore, navigation buttons
appear that can be used to scroll to the next page.
The number indicates how many buttons should be used to scroll
between multiple pages with function icons.
Character representation
Character representation on the terminal.
Activating and deactivating applications
In the “Service” application you can activate and deactivate other applications that are installed on the
terminal.
The applications are installed in packages, in so-called plug ins. A plug in can contain several
applications.
You can for example deactivate a plugin if you do not want to use it. The plug-in will then not be
displayed in the selection menu.
Name of the plug-in
Activates the following applications
TRACK-Leader TRACK-Leader
SECTION-Control
TRACK-Leader TOP
TRACK-Leader AUTO
ISOBUS-TC
Task management (ISOBUS-TC) [
➙
66]
Tractor-ECU
Tractor-ECU application [
➙
51]
Camera The terminal screen will show the image from the connected
camera.
FIELD-Nav
FIELD-Nav
FILE-Server
FILE-Server application [
➙
78]
Virtual ECU
Virtual ECU application [
➙
61]
To activate and deactivate plug-ins:
1.
- Open the “Service” application.
2. Tap “Plug-ins”.
⇨ Screen “Plug-ins” appears.
3. To activate or disable a plug-in, tap it.
7.3
Procedure