10
Task management (ISOBUS-TC)
MULTI-Control
4. Tap .
5. Tap
.
6. Enter the desired change in value. For example: 50% = halve, 200% = double
7.
- Confirm.
⇨ The “Prescription maps” screen appears.
⇨ All values have been changed.
⇨
- Exit the screen to save the changes.
To change a selected value:
1.
- Open the ISOBUS-TC application.
2. Tap “Fields”.
3. Tap on the field to be edited.
4. Tap
.
5. In the column with the target rates (left), tap the value that you want to change.
⇨ The keyboard appears.
6. Enter the new value.
7.
- Confirm.
⇨ The “Prescription maps” screen appears.
⇨ The new value appears in the cell you have changed.
8.
- Exit the screen to save the changes.
ISO-XML prescription maps
Prescription maps in ISO-XML format are created in an electronic Farm Management Information
System and are transmitted to the terminal with an ISO-XML task.
The ISOBUS-TC license is required to edit them.
Working with ISO-XML tasks is described in the instructions for ISOBUS-TC.
MULTI-Control
After activating the MULTI-Control license, you can use the ISOBUS-TC app to assign multiple
prescription maps to a machine.
This is necessary in two cases:
▪ MULTI-Rate - If the machine applies only one product that is metered by several metering units.
For example, a field sprayer with two tanks and two control manifolds.
▪ MULTI-Product - If the machine has several tanks that are used to apply different products at
different rates. For example: Planter/seeder with liquid fertilizer.
MULTI-Control is described in separate operating instructions.
To Next Page
Loading...