MULTISOFT DGR-1000 - Page 62

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
62
The entries in the NTP peers table have the following format:
OBJECTNUMBER
Name
Access
Type
Description
1
staNtpRemote
AddressType
read-only
enum
Type of IP address of the remote
NTP server:
0 – unknown
1 – ipv4
2 – ipv6
3 – ip4z
4 – ip6z
16 – dns
2
staNtpRemote
Address
read-only
string
IP address of the remote NTP
server
3
staNtpLocal
AddressType
read-only
Enum
Type of IP address of the local
NTP client:
0 – unknown
1 – ipv4
2 – ipv6
3 – ip4z
4 – ip6z
16 – dns
4
staNtpLocal
Address
read-only
String
IP address of the local NTP client
5
StaNtpStratum
read-only
Integer
Stratum of the remote NTP
server
6
staNtpPoll
read-only
Integer
Frequency of server polling in
seconds
7
staNtpReach
read-only
Octal
Octal bitmask of success or
failure of last 8 queries (left-
shifted). e.g:
377 – 11111111 – all 8 recent
queries were successful
317 – 11001111 – from 8 recent
queries 5
th
and 6
th
failed
8
staNtpDelay
read-only
String
Network round trip time in
seconds
9
staNtpOffset
read-only
String
Difference between local clock
and remote server’s clock in
seconds
10
staNtpDispersion
read-only
String
Maximum error of the local
clock relative to the reference
clock in seconds
11
staNtpFlag
read-only
String
NTP flag