MULTISOFT VGR-1000 - Page 31

Video Grabber User Manual - v. 1.19 (FW 1.29)
31
4.2.2.2. NFS settings
When user sets the Output to NFS (see 4.2.1.1) then access details to the NFS share have to be
provided. Up to two remote shares can be configured. Video Grabber supports NFSv3 described in
RFC1813.
See the table below for the description of the required parameters. Identification numbers (first
column) refer to the parameter’s position on the Figure 25.
Settings for NFS1
No
Name
Description
Allowed values
3
NFS location
NFS location in the following format:
Server_IP:/share
Example:
192.168.5.1:/pub
Valid NFS share
4
UID
User ID used within the share’s filesystem that
allows read-write access to the share.
Example:
5
Integer
0 – 2147483647
5
GID
Group ID used within the share’s filesystem that
allows read-write access to the share.
Example:
10
Integer
0 – 2147483647
Settings for NFS2
No
Name
Description
Allowed values
11
NFS location
NFS location in the following format:
Server_IP:/share
Example:
192.168.6.1:/pub
Valid NFS share
12
UID
User ID used within the share’s filesystem that
allows read-write access to the share
Example:
5
Integer
0 – 2147483647
13
GID
Group ID used within the share’s filesystem that
allows read-write access to the share
Example:
10
Integer
0 – 2147483647