Selecting Driver Options/Defaults (for Windows) 5-3
" The [Acquire Device Information] is available only if bi-directional
communication is available with the printer; otherwise it is grayed
out.
If Windows Server 2008 R2/7/Vista/Server 2008 is being used,
[Acquire Device Information] can also be clicked when the
machine is connected via USB.
6 From the [Device Option] list, select an option, one at a time, and then
select [Installed] or [None] from the [Setting] menu.
7 Click [Apply].
" Depending on the version of the operating system, [Apply] may not
appear. If this is the case, continue with the next step.
8 Select the [General] tab.
9 Click [Printing Preferences].
Printing Preference dialog box appears.
10 Select the default settings for your printer, such as the default media for-
mat you use, in the appropriate tabs.
11 Click [Apply].
12 Click [OK] to exit from the Print preference dialog box.
13 Click [OK] to exit from the Properties dialog box.
To Next Page
Loading...
