Replacing Consumables11-32
6 Remove the hook, and then
insert a new backup battery.
" When inserting the new
backup battery, be sure
that the + side faces tow-
erd the left.
" Risk of explosion if bat-
tery is replaced by an
incorrect type. Dispose of
used batteries according
to your local regulations.
Do not burn the backup
battery.
7 Reinstall the panel and tighten a screw.
8 Install the cover.
9 Reconnect all interface cables.
10 Reconnect the power cord, and
turn on the machine.
11 Use [Date(XX. XX. XX)] on the [Admin Settings]/[Machine Settings]/
[Date & Time Settings] menu to set the date, and use [Time] on the
[Admin Settings]/[Machine Settings]/[Date & Time Settings] menu to set
the time.
To Next Page
Loading...
Need help?
General
