Registering a user 15-11
When registering a user, you can only enter the card ID and associate the
user with card using the authentication device unit connected to this machine.
1 Turn the main power switch on.
2 To register a user and card with Data Administrator at a time, connect the
authentication device to the USB port of the computer that contains Data
Administrator.
" Do not connect another USB device to the same port as for the
authentication device. Doing so reduces the USB power supply,
resulting in an operation failure.
" To use the USB hub, be sure to connect the self-power USB hub that
supplies 500 mA or more.
" Restart the procedure 5 or more seconds after connecting the authen-
tication device.
3 Data Administrator starts, and device information of this machine is
imported.
The Device Information window appears.
– For details on how to import device information, refer to the Data
Administrator User's Guide.
To Next Page
Loading...
