Section 50 00-02-0329
01-09-07 - 16 -
Setup Mode – Menus
The condition on the display indicates the RUN and SHUTDOWN icons may be on.
Key Function
Setup/Enter
If the unit is in SETUP 0, pressing [ENTER] exits the unit from the
Setup Mode. If the unit is in any other Setup, pressing [ENTER]
accesses the sub-menu for that Setup.
Up Arrow
Press [UP ARROW} to navigate to the next menu.
Down Arrow
Press [DOWN ARROW} to navigate to the previous menu.
Reset/ESC
Press [ESC] to exit from the Setup Menu and return to the
operational display for the current mode.
Stop
If the system is in Run Mode, pressing and holding the [STOP]
key for 2 seconds will begin the Shutdown sequence.
Setup Mode – Edit Settings
The condition on the display indicates the SETUP icon shows, and either the RUN or
SHUTDOWN icons may show.
Key Function
Setup/Enter
Press [ENTER] to exit or advance a Setup menu and save
changes.
Up Arrow
Press [UP ARROW} to increment the value to the maximum
range. Holding the key accelerates the incrementing action.
Down Arrow
Press [DOWN ARROW} to decrement the value to the minimum
range. Holding the key accelerates the decrementing action.
Reset/ESC
Press [ESC] to exit or advance the Setup Menu without saving
your changes.
Stop
If the system is in Run Mode, pressing and holding the [STOP]
key for 2 seconds will begin the Shutdown sequence.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
Need help?
General
